We don’t know about you, but when a new season comes we feel the need to redecorate! A fun accent table is the perfect way to bring in some color to your space. Kara Whitten of Kailo Chic is sharing her DIY Geometric Accent Table tutorial with us today and we couldn’t be more excited! This gorgeous table can be used as a table in the living room or a nightstand in your bedroom. The best part is, you can create it exactly how you want to! Pick out your design, border paint color, and color of legs you want. This is the perfect DIY table for a personalized touch to your space! Check out Kara’s tutorial below:
“Looking for a unique side table or night stand for your home? Sure you could go out and buy one, but why not DIY one instead? You will end up with a unique one of a kind piece and it is easier than you think to make your own. I made this abstract geometric side table with a pop of color using a large (36” in diameter) round wood piece from the home improvement store, some wood stain and polycrylic, acrylic paint in yellow, and an old table base.
To begin you will need to cut down your wood round into an abstract geometric shape. To do this use a pencil and ruler to trace lines on the edge of the wood at various angles and lengths. We ended up with 8 edges when we did this, but the shape is by no means a perfect octagon. Go with your eye and make the lines asymmetric and interesting to you. Once you have your edges traced out, you will need to clamp your piece of wood to your work bench and use a circular saw to cut the edges along your lines. If you don’t have access to power tools, no problem! Either find a friend that can help, or take your slab back to the home improvement store and have them cut it for you. The cuts won’t be exact, but they don’t have to be. That is the beauty of this project!
Once your piece of wood has been cut into shape, it is time to stain it. I went with Minwax stain in dark walnut. First I prepped my wood by making sure it was clean and free of dust, then I used a piece of old kitchen tea towel to stain the wood on the top and bottom only according to the stain can. I used two coats to get a nice dark walnut color. Now it is time to let your piece of wood dry over night. Now that the stain has had time to soak in, you will want to paint the edges. Any latex based paint will work for this part, but I ended up using acrylic craft paint in yellow instead. Just choose the color you like best and paint the edges of the table top. If you don’t have a steady hand, feel free to tape off the top and bottom while painting the edge, but I just freehanded it.
Once you have your table top stained and painted, it is time to seal it. I went with satin sheen polycrylic. It is water based so it cleans up easily which I like and it is not full of VOC’s. Using an nice angled paint brush (I am partial to the small rubber handled Wooster or Blue Hawk brushes), coat the top and sides of the table with the polycrylic. Let dry 30 minutes and then apply a second coat. Make sure to watch the edges for drips and brush them out if they appear. Let sit for another 2-3 days to cure.
While the top is curing, it is time to procure your base. I went with a table base from an old side table I had, but think outside the box. Go thrifting for a junk table with great legs. Or how about a stool base or a wire trashcan turned upside down? Not into repurposing? Then look online at places like Etsy or Pretty Pegs to find new table legs that you can use instead. If it isn’t in a color that you like, just use a can of spray paint for an instant transformation. Digging the gold I have going on here? Use a can of Valspar Metallic Gold Spray paint for the same look.
Now that you have your base and table top, it is time to assemble your new side table. Because my table had a ring around the top that held the old piece of glass that broke, I used two hole metal tubing clips to attach the top to the base. I just placed them around the top and used small screws to secure the table top. This would also work if you were using a wire trash can (just use a smaller clip meant for smaller tubing). If your table base already has a top (smaller than the new one), you can glue the new top on to the old one using Gorilla Wood Glue and some clamps. Of if you found some new hair pin legs you like instead, those can get screwed right on to the table top itself. Just be sure to use screws small enough that they won’t poke trough the other side and ruin the top of the table. Now that your table top is secured to the base, flip it over, add some accessories and marvel in the joy of building your very own side table. One that is uniquely yours and just your style!”
Tutorial and Photography for Best Friends for Frosting by: Kara Whitten, Kailo Chic